30245 by Midland | Push On Hose Barb Fitting | SAE Flare | 3/4-16 UNF Thread | 1/2" Hose ID x 1/2" 45° Male Flare | Adapter | Brass LegacyProductTypeReplacement_Polyurethane Pressure Tubing do not interchange other manufacturers'

do not interchange other manufacturers' products with Dixon® products

NO hose fittings manufactured and/or sold by any Dixon® company can be safely used in life dependency applications such as diving

Diameter K Ø A D E&Oslash H Dash Size DN Dash Size 6S16CTB16 -16 25 -16 1

83" 21mm 75 PSI 200ft 0

30245 by Midland | Push On Hose Barb Fitting | SAE Flare | 3/4-16 UNF Thread | 1/2" Hose ID x 1/2" 45° Male Flare | Adapter | Brass LegacyProductTypeReplacement_Polyurethane Pressure Tubing do not interchange other manufacturers'SPECIFICATIONS Applications: Low Pressure Air, Fuel, Lube, and Oil Lines Pressure determined by tube material and hardness. Midland Parts have been tested to max 150 PSI Advantages: Easy assembly. No clamps needed. SAE Rating: N A Lead Free: No Assembly Instructions: 1) Lubricate insert. 2) Hold hose at angle as shown & push on and up over first barb. 3) Continue to push straight on until hose is seated under protective plastic cap. Keep hands back