Headstock Bearings and Seals: Honda CR125 CR 125 (1976-1978) Suzuki AN400 This ignition coil has been

This ignition coil has been manufactured to replace the original stick coil on a Suzuki GSXR600 for the years and models shown above

Yamaha TZR 250 (2XW) (1988-1989)

This set of head stock bearings are taper roller style bearings that have been manufactured to replace the original set of steering bearings on an RM250 for the years and models shown above

This set of brake pads will fit the front and rear brake on a Honda XL1000 for the years and models shown above

Headstock Bearings and Seals: Honda CR125 CR 125 (1976-1978) Suzuki AN400 This ignition coil has beenBrand new set of headstock steering bearings and seals to fit: Honda CR 125 M (1976 1978). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda CR125 for the years and models shown above. Top sized: 22. 5mm x 41mm x 12mm. Bottom sized: 24mm x 41mm x 12mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. If you require