Headstock Bearings and Seals: Honda CR50 CR 50 (1983-1985) Triumph Tiger 800 so are designed to lower

so are designed to lower the height on a Honda CB550 for the years and models shown above

If you're having spark problems on your Kawasaki ZRX1200 then it's a good idea to get some new coils on the bike as these could be the culprit to a weak spark

This set of taper roller bearings have been designed to replace the original headstock bearings on a BMW R 60/6 for the years 1973

It has 8 pins and is a simple plug and play from the original CDI

Headstock Bearings and Seals: Honda CR50 CR 50 (1983-1985) Triumph Tiger 800 so are designed to lowerBrand new set of headstock steering bearings and seals to fit: Honda CR 50 R (1983 1985). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda CR50 for the years and models shown above. Top sized: 22. 5mm x 41mm x 12mm. Bottom sized: 24mm x 41mm x 12mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. If you require different